Vanity Sink Top · Model YJ-894-70
700mm basin, model YJ-894-70
700 mm rectangular vanity sink top, 190 mm deep, cast as one piece so there is no joint between basin and top. One factory tap hole with an overflow outlet.
At a glance
- 700 × 475 × 190 mm (L × W × D)
- Rectangular plan, one-piece top format
- Vitreous china
- One tap hole, drilled at the factory
- Overflow outlet fitted
- 0.075 m³ packed volume per piece
- MOQ 30 pcs per model, per size, per colour
Specification
| Model | YJ-894-70 |
|---|---|
| Range | Vanity Sink Tops |
| Series | YJ-894 |
| Material | Vitreous china |
| Dimensions | 700 × 475 × 190 mm |
| Installation | Integrated |
| MOQ | 30 pcs per model, per size, per colour |
|---|---|
| Production lead time | 30–45 days for a full container |
| Sample lead time | within 15 days |
| Incoterm | FOB Yantian, Shenzhen · EXW for orders with a forwarder in China |
Approval on file
| Market status | No market-specific certificate on file for this model. It is quoted as a standard version, and certification can be arranged against the destination market. |
|---|
Every certificate number can be checked with the issuing body before the order. Scans are sent with the quotation.
Sizes around this one
Widths in this range run from small cloakroom sizes to full-width tops. The two nearest sizes to model YJ-894-70 are shown below with their model numbers, so a project can mix widths in one order.
| Width | Model | Depth |
|---|---|---|
| 610 mm | YJ-897-60 | 180 mm |
| 700 mm | YJ-894-70 this page | 190 mm |
| 710 mm | S2001-70 | 170 mm |
Container loading
Packed volume for model YJ-894-70 is 0.075 m³ per piece. At 28 m³ usable in a 20GP and 68 m³ in a 40HQ, that is about 374 pcs and 909 pcs respectively.
Calculated from the packed volume in our catalogue. Final quantity depends on the loading plan — we confirm it against the container drawing before booking.
Questions buyers ask about this model
Yes, an overflow outlet is part of the casting. It needs a waste with an overflow inlet — a free-flow waste without one will not work on this basin.
Yes — one tap hole, drilled at the factory to the tap you specify. Ceramic cannot be re-drilled after firing, so send the tap model or the drilling drawing with the order.
MOQ is 30 pcs per model, per size, per colour. Production lead time is 30–45 days for a full container from artwork and deposit, and a sample ships within 15 days. Mixed-model containers are quoted per model, so a container can combine several sizes.
At 0.075 m³ packed per piece, about 909 pcs fit in a 40HQ and 374 pcs in a 20GP, assuming full mixed loading. The final figure is confirmed against the loading plan.