Vanity Sink Top · Model S2001-90
36 inch bathroom sink, model S2001-90
910 mm rectangular vanity sink top, 170 mm deep, cast as one piece so there is no joint between basin and top. One factory tap hole with an overflow outlet.
At a glance
- 910 × 460 × 170 mm (L × W × D)
- Rectangular plan, one-piece top format
- Vitreous china
- One tap hole, drilled at the factory
- Overflow outlet fitted
- 0.085 m³ packed volume per piece
- MOQ 30 pcs per model, per size, per colour
Specification
| Model | S2001-90 |
|---|---|
| Range | Vanity Sink Tops |
| Series | S2001 |
| Material | Vitreous china |
| Dimensions | 910 × 460 × 170 mm |
| Installation | Integrated |
| MOQ | 30 pcs per model, per size, per colour |
|---|---|
| Production lead time | 30–45 days for a full container |
| Sample lead time | within 15 days |
| Incoterm | FOB Yantian, Shenzhen · EXW for orders with a forwarder in China |
Approval on file
| NA | cUPC (ASME A112.19.2 / CSA B45.1) |
|---|
Every certificate number can be checked with the issuing body before the order. Scans are sent with the quotation.
Sizes around this one
Widths in this range run from small cloakroom sizes to full-width tops. The two nearest sizes to model S2001-90 are shown below with their model numbers, so a project can mix widths in one order.
| Width | Model | Depth |
|---|---|---|
| 900 mm | S2047-90 | 180 mm |
| 910 mm | S2001-90 this page | 170 mm |
| 915 mm | YJ-843-90 | 200 mm |
Container loading
Packed volume for model S2001-90 is 0.085 m³ per piece. At 28 m³ usable in a 20GP and 68 m³ in a 40HQ, that is about 330 pcs and 801 pcs respectively.
Calculated from the packed volume in our catalogue. Final quantity depends on the loading plan — we confirm it against the container drawing before booking.
Questions buyers ask about this model
Yes — one tap hole, drilled at the factory to the tap you specify. Ceramic cannot be re-drilled after firing, so send the tap model or the drilling drawing with the order.
Yes, an overflow outlet is part of the casting. It needs a waste with an overflow inlet — a free-flow waste without one will not work on this basin.
At 0.085 m³ packed per piece, about 801 pcs fit in a 40HQ and 330 pcs in a 20GP, assuming full mixed loading. The final figure is confirmed against the loading plan.
MOQ is 30 pcs per model, per size, per colour. Production lead time is 30–45 days for a full container from artwork and deposit, and a sample ships within 15 days. Mixed-model containers are quoted per model, so a container can combine several sizes.