Vanity Sink Top · Model S2001-100
40 inch sink, model S2001-100
1010 mm rectangular vanity sink top, 170 mm deep, cast as one piece so there is no joint between basin and top. One factory tap hole with an overflow outlet.
At a glance
- 1010 × 460 × 170 mm (L × W × D)
- Rectangular plan, one-piece top format
- Vitreous china
- One tap hole, drilled at the factory
- Overflow outlet fitted
- 0.094 m³ packed volume per piece
- MOQ 30 pcs per model, per size, per colour
Specification
| Model | S2001-100 |
|---|---|
| Range | Vanity Sink Tops |
| Series | S2001 |
| Material | Vitreous china |
| Dimensions | 1010 × 460 × 170 mm |
| Installation | Integrated |
| MOQ | 30 pcs per model, per size, per colour |
|---|---|
| Production lead time | 30–45 days for a full container |
| Sample lead time | within 15 days |
| Incoterm | FOB Yantian, Shenzhen · EXW for orders with a forwarder in China |
Approval on file
| EU | CE — 25202600177 / 25202600178 (EN 14688) |
|---|
Every certificate number can be checked with the issuing body before the order. Scans are sent with the quotation.
Sizes around this one
Widths in this range run from small cloakroom sizes to full-width tops. The two nearest sizes to model S2001-100 are shown below with their model numbers, so a project can mix widths in one order.
| Width | Model | Depth |
|---|---|---|
| 1000 mm | YJ-894-100 | 190 mm |
| 1010 mm | S2001-100 this page | 170 mm |
| 1015 mm | YJ-843-100 | 200 mm |
Container loading
Packed volume for model S2001-100 is 0.094 m³ per piece. At 28 m³ usable in a 20GP and 68 m³ in a 40HQ, that is about 298 pcs and 724 pcs respectively.
Calculated from the packed volume in our catalogue. Final quantity depends on the loading plan — we confirm it against the container drawing before booking.
Questions buyers ask about this model
Yes — one tap hole, drilled at the factory to the tap you specify. Ceramic cannot be re-drilled after firing, so send the tap model or the drilling drawing with the order.
Yes, an overflow outlet is part of the casting. It needs a waste with an overflow inlet — a free-flow waste without one will not work on this basin.
At 0.094 m³ packed per piece, about 724 pcs fit in a 40HQ and 298 pcs in a 20GP, assuming full mixed loading. The final figure is confirmed against the loading plan.
MOQ is 30 pcs per model, per size, per colour. Production lead time is 30–45 days for a full container from artwork and deposit, and a sample ships within 15 days. Mixed-model containers are quoted per model, so a container can combine several sizes.
At 1010 mm the top is a two-person lift and needs a straight run to the bathroom before the door frames go in. It ships on a pallet with edge protection; we do not split it across two cartons.