Vanity Sink Top · Model 9268
200mm cloakroom basins, model 9268
405 mm rectangular vanity sink top, 105 mm deep, cast as one piece so there is no joint between basin and top. One factory tap hole with an overflow outlet.
At a glance
- 405 × 215 × 105 mm (L × W × D)
- Rectangular plan, one-piece top format
- Vitreous china
- One tap hole, drilled at the factory
- Overflow outlet fitted
- 0.013 m³ packed volume per piece
- MOQ 30 pcs per model, per size, per colour
Specification
| Model | 9268 |
|---|---|
| Range | Vanity Sink Tops |
| Series | 9268 |
| Material | Vitreous china |
| Dimensions | 405 × 215 × 105 mm |
| Installation | Integrated |
| MOQ | 30 pcs per model, per size, per colour |
|---|---|
| Production lead time | 30–45 days for a full container |
| Sample lead time | within 15 days |
| Incoterm | FOB Yantian, Shenzhen · EXW for orders with a forwarder in China |
Approval on file
| NA | cUPC (ASME A112.19.2 / CSA B45.1) |
|---|
Every certificate number can be checked with the issuing body before the order. Scans are sent with the quotation.
Sizes around this one
Widths in this range run from small cloakroom sizes to full-width tops. The two nearest sizes to model 9268 are shown below with their model numbers, so a project can mix widths in one order.
| Width | Model | Depth |
|---|---|---|
| 405 mm | 9268 this page | 105 mm |
| 420 mm | 627 | 190 mm |
Container loading
Packed volume for model 9268 is 0.013 m³ per piece. At 28 m³ usable in a 20GP and 68 m³ in a 40HQ, that is about 2,240 pcs and 5,440 pcs respectively.
Calculated from the packed volume in our catalogue. Final quantity depends on the loading plan — we confirm it against the container drawing before booking.
Questions buyers ask about this model
Yes, an overflow outlet is part of the casting. It needs a waste with an overflow inlet — a free-flow waste without one will not work on this basin.
Yes — one tap hole, drilled at the factory to the tap you specify. Ceramic cannot be re-drilled after firing, so send the tap model or the drilling drawing with the order.
MOQ is 30 pcs per model, per size, per colour. Production lead time is 30–45 days for a full container from artwork and deposit, and a sample ships within 15 days. Mixed-model containers are quoted per model, so a container can combine several sizes.
The bowl is 105 mm deep and the rim sits close to the wall line, so allow room behind the rim for the tap base and lever swing before fixing the counter cut-out.
At 0.013 m³ packed per piece, about 5,440 pcs fit in a 40HQ and 2,240 pcs in a 20GP, assuming full mixed loading. The final figure is confirmed against the loading plan.