Undermount Basin · Model 6002
600mm sink, model 6002
600 mm oval undermount basin, 190 mm deep, fitted below the counter for a flush surface. Fitted with an overflow outlet, and supplied with a cutting template.
At a glance
- 600 × 400 × 190 mm (L × W × D)
- Oval plan, below-counter format
- Vitreous china
- No tap hole — tap mounts on the counter
- Overflow outlet fitted
- 0.055 m³ packed volume per piece
- MOQ 30 pcs per model, per size, per colour
Specification
| Model | 6002 |
|---|---|
| Range | Undermount Basins |
| Series | 6002 |
| Material | Vitreous china |
| Dimensions | 600 × 400 × 190 mm |
| Installation | Undermount |
| MOQ | 30 pcs per model, per size, per colour |
|---|---|
| Production lead time | 30–45 days for a full container |
| Sample lead time | within 15 days |
| Incoterm | FOB Yantian, Shenzhen · EXW for orders with a forwarder in China |
Approval on file
| Market status | No market-specific certificate on file for this model. It is quoted as a standard version, and certification can be arranged against the destination market. |
|---|
Every certificate number can be checked with the issuing body before the order. Scans are sent with the quotation.
Sizes around this one
Widths in this range run from small cloakroom sizes to full-width tops. The two nearest sizes to model 6002 are shown below with their model numbers, so a project can mix widths in one order.
| Width | Model | Depth |
|---|---|---|
| 570 mm | 6003 | 200 mm |
| 600 mm | 6002 this page | 190 mm |
Container loading
Packed volume for model 6002 is 0.055 m³ per piece. At 28 m³ usable in a 20GP and 68 m³ in a 40HQ, that is about 511 pcs and 1,243 pcs respectively.
Calculated from the packed volume in our catalogue. Final quantity depends on the loading plan — we confirm it against the container drawing before booking.
Questions buyers ask about this model
No. This is a countertop basin without a factory tap hole; the tap is drilled into the counter behind the basin, which is why the counter needs room behind the rim for the tap base.
Yes, an overflow outlet is part of the casting. It needs a waste with an overflow inlet — a free-flow waste without one will not work on this basin.
At 0.055 m³ packed per piece, about 1,243 pcs fit in a 40HQ and 511 pcs in a 20GP, assuming full mixed loading. The final figure is confirmed against the loading plan.
MOQ is 30 pcs per model, per size, per colour. Production lead time is 30–45 days for a full container from artwork and deposit, and a sample ships within 15 days. Mixed-model containers are quoted per model, so a container can combine several sizes.