Undermount Basin · Model 2131
300mm basin, model 2131
330 mm oval undermount basin, 165 mm deep, fitted below the counter for a flush surface. Fitted with an overflow outlet, and supplied with a cutting template.
At a glance
- 330 × 285 × 165 mm (L × W × D)
- Oval plan, below-counter format
- Vitreous china
- No tap hole — tap mounts on the counter
- Overflow outlet fitted
- 0.021 m³ packed volume per piece
- MOQ 30 pcs per model, per size, per colour
Specification
| Model | 2131 |
|---|---|
| Range | Undermount Basins |
| Series | 2131 |
| Material | Vitreous china |
| Dimensions | 330 × 285 × 165 mm |
| Installation | Undermount |
| MOQ | 30 pcs per model, per size, per colour |
|---|---|
| Production lead time | 30–45 days for a full container |
| Sample lead time | within 15 days |
| Incoterm | FOB Yantian, Shenzhen · EXW for orders with a forwarder in China |
Approval on file
| NA | cUPC (ASME A112.19.2 / CSA B45.1) |
|---|
Every certificate number can be checked with the issuing body before the order. Scans are sent with the quotation.
Where it goes
In use
Hotel refurbishments with solid-surface tops
An undermount bowl is the option when the counter is the design: the solid surface runs unbroken and the basin sits below it, bonded to the underside. At 330 × 285 mm it suits a single-occupancy room where the vanity is compact.
The interior is glazed and the rim is left unglazed so the adhesive has something to key to. What you see above the line is counter, cut-out edge and white glaze — no ceramic rim to chip or collect soap. It is the practical choice where the vanity top is being replaced anyway and the basin is matched to a new cut-out.
- 330 × 285 × 165 mm — compact bowl for a single-occupancy room
- Unglazed bonding rim: sits under the counter, not on it
- Glazed interior with overflow inlet and central drain
Sizes around this one
Widths in this range run from small cloakroom sizes to full-width tops. The two nearest sizes to model 2131 are shown below with their model numbers, so a project can mix widths in one order.
| Width | Model | Depth |
|---|---|---|
| 330 mm | 2131 this page | 165 mm |
| 415 mm | 2161 | 190 mm |
Container loading
Packed volume for model 2131 is 0.021 m³ per piece. At 28 m³ usable in a 20GP and 68 m³ in a 40HQ, that is about 1,359 pcs and 3,300 pcs respectively.
Calculated from the packed volume in our catalogue. Final quantity depends on the loading plan — we confirm it against the container drawing before booking.
Questions buyers ask about this model
Yes, an overflow outlet is part of the casting. It needs a waste with an overflow inlet — a free-flow waste without one will not work on this basin.
No. This is a countertop basin without a factory tap hole; the tap is drilled into the counter behind the basin, which is why the counter needs room behind the rim for the tap base.
MOQ is 30 pcs per model, per size, per colour. Production lead time is 30–45 days for a full container from artwork and deposit, and a sample ships within 15 days. Mixed-model containers are quoted per model, so a container can combine several sizes.
At 0.021 m³ packed per piece, about 3,300 pcs fit in a 40HQ and 1,359 pcs in a 20GP, assuming full mixed loading. The final figure is confirmed against the loading plan.