Countertop Basin · Model 9555A
600 mm rectangular countertop basin with tap deck, model 9555A
The tap sits on the basin rather than the counter, so the stone behind it stays a clean line.
For vanity tops that need no drilling. 600 × 420 mm (23.6 × 16.5 in), 130 mm (5.1 in) deep, one tap hole in the deck, overflow fitted.
Key details
- 600 × 420 × 130 mm (23.6 × 16.5 × 5.1 in) · L × W × D
- Rectangular plan, sit-on-counter format
- Vitreous china
- One tap hole, drilled at the factory
- Overflow outlet fitted
- 0.041 m³ packed volume per piece
- MOQ 30 pcs per model, per size, per colour
Product overview
The deck does the work
A raised deck at the back carries the tap. The counter then needs one hole for the waste and nothing else, which on a stone top is the difference between a clean install and a hole in the wrong place.
130 mm is shallow on purpose. At that depth the water sits low enough to splash inward instead of over the rim, which is the failure mode of a deep vessel on a shallow counter.
- 600 × 420 × 130 mm (23.6 × 16.5 × 5.1 in) bowl
- Tap hole in the raised deck
- Overflow fitted
- 0.041 m³ packed per piece
Specification
| Model | 9555A |
|---|---|
| Range | Countertop Basins |
| Series | 9555 |
| Material | Vitreous china |
| Dimensions | 600 × 420 × 130 mm (23.6 × 16.5 × 5.1 in) |
| Installation | Countertop |
| Tap hole | 1 tap hole (pre-drilled deck) |
| Overflow | Fitted with overflow |
| MOQ | 30 pcs per model, per size, per colour |
|---|---|
| Production lead time | 30–45 days for a full container |
| Sample lead time | within 15 days |
| Incoterm | FOB Yantian, Shenzhen · EXW for orders with a forwarder in China |
Project documentation
| EU | CE — 25202600177 / 25202600178 (EN 14688) |
|---|
How to verify
Every certificate number can be checked with the issuing body before the order. Scans are sent with the quotation.
Where it goes
In use
Family bathrooms and vanity units
Limestone, a black mixer on the deck, a round mirror. The counter is untouched: no drill holes, no silicone bead, just a basin standing on it.
That also makes it the easy swap. Lift the basin, clean the stone, and a different bowl goes on the same counter without a templater.
- Sits on the counter, no cut-out
- Tap mounted on the basin deck
- Push-button pop-up waste
Sizes around this one
Widths in this range run from small cloakroom sizes to full-width tops. The two nearest sizes to model 9555A are shown below with their model numbers, so a project can mix widths in one order.
| Width | Model | Depth |
|---|---|---|
| 590 mm (23.2 in) | 9061 | 130 mm (5.1 in) |
| 600 mm (23.6 in) | 9555A this page | 130 mm (5.1 in) |
| 610 mm (24.0 in) | 9446B | 125 mm (4.9 in) |
Container loading
Packed volume for model 9555A is 0.041 m³ per piece. At 28 m³ usable in a 20GP and 68 m³ in a 40HQ, that is about 684 pcs and 1,662 pcs respectively.
Calculated from the packed volume in our catalogue. Final quantity depends on the loading plan — we confirm it against the container drawing before booking.
Behind the model
Decks are pressed in the same mould as the bowl, so the tap hole lands on centre every time rather than being drilled after firing.
We have shipped into North America, Europe, Africa and South East Asia long enough to know what each border asks for. cUPC, CE, WaterMark, SASO, RCM and UKCA are already in the file. Name the destination and we will name the document route the order needs.
- cUPC, CE, WaterMark, SASO, RCM and UKCA on file
- Shipping to 35+ countries
FAQ
Yes, an overflow outlet is part of the casting. It needs a waste with an overflow inlet — a free-flow waste without one will not work on this basin.
Yes — model 9555A features one factory tap hole pre-drilled on the rear ceramic deck. The basin mixer mounts directly to the basin, keeping the vanity top dry and avoiding hole-cutting in stone countertops.
At 600 × 420 mm, this countertop basin with tap deck fits single vanities from 750 mm to 1000 mm with working counter either side, or double-vanity runs from 1500 mm.
At 0.041 m³ packed per piece, about 1,662 pcs fit in a 40HQ and 684 pcs in a 20GP, assuming full mixed loading. The final figure is confirmed against the loading plan.
MOQ is 30 pcs per model, per size, per colour. Production lead time is 30–45 days for a full container from artwork and deposit, and a sample ships within 15 days. Mixed-model containers are quoted per model, so a container can combine several sizes.
