Countertop Basin · Model 9435
400mm bathroom sink, model 9435
730 mm oval countertop basin, 135 mm deep, sitting on the counter, with one factory tap hole in the deck. No overflow outlet.
At a glance
- 730 × 415 × 135 mm (L × W × D)
- Oval plan, sit-on-counter format
- Vitreous china
- One tap hole, drilled at the factory
- No overflow outlet
- 0.051 m³ packed volume per piece
- MOQ 30 pcs per model, per size, per colour
Specification
| Model | 9435 |
|---|---|
| Range | Countertop Basins |
| Series | 9435 |
| Material | Vitreous china |
| Dimensions | 730 × 415 × 135 mm |
| Installation | Countertop |
| MOQ | 30 pcs per model, per size, per colour |
|---|---|
| Production lead time | 30–45 days for a full container |
| Sample lead time | within 15 days |
| Incoterm | FOB Yantian, Shenzhen · EXW for orders with a forwarder in China |
Approval on file
| NA | cUPC (ASME A112.19.2 / CSA B45.1) |
|---|
Every certificate number can be checked with the issuing body before the order. Scans are sent with the quotation.
Where it goes
In use
Hotel guest bathrooms
A 730 mm oval rim is the size a hotel guest bathroom tends to land on: wide enough to use one-handed while standing at the mirror, narrow enough to leave counter space on both sides. The basin is 135 mm overall, so it clears a standard mirror line without pushing the mirror up the wall.
It carries one factory tap hole in the deck, so the tap stands in the basin and the counter is only cut for the waste — one less hole to drill on site. There is no overflow outlet, so it takes a free-flow waste and there is no internal slot to clean around.
- 730 × 415 × 135 mm — fits a 900–1200 mm vanity run with counter either side
- One factory tap hole in the deck: the counter is not drilled for the tap
- No overflow: free-flow waste only, no internal slot to keep clean
Container loading
Packed volume for model 9435 is 0.051 m³ per piece. At 28 m³ usable in a 20GP and 68 m³ in a 40HQ, that is about 553 pcs and 1,343 pcs respectively.
Calculated from the packed volume in our catalogue. Final quantity depends on the loading plan — we confirm it against the container drawing before booking.
Questions buyers ask about this model
No. The bowl is a plain casting with a single outlet, so it takes a free-flow waste without an overflow inlet.
Yes — one tap hole, drilled at the factory to the tap you specify. Ceramic cannot be re-drilled after firing, so send the tap model or the drilling drawing with the order.
MOQ is 30 pcs per model, per size, per colour. Production lead time is 30–45 days for a full container from artwork and deposit, and a sample ships within 15 days. Mixed-model containers are quoted per model, so a container can combine several sizes.
At 0.051 m³ packed per piece, about 1,343 pcs fit in a 40HQ and 553 pcs in a 20GP, assuming full mixed loading. The final figure is confirmed against the loading plan.